Hi!my R3 has just arrived but having issue with firmware update.
1. Plugged R3 Lightning to USB
2. Run DCC tool
3. it says load firmware
4. I loaded MJF 2002 FSSB R3
5. it gets back to "Connect your R3"
how do I update firmware correctly?
DCC tool Firmware update issue with R3 Lightning
-
birdaffirm
- Posts: 2
- Joined: Tue Feb 04, 2020 7:51 am
- Product: R3L
- S/N: 242
-
Shark
- Posts: 137
- Joined: Thu Jan 10, 2013 1:44 pm
- Product: ---
- S/N: 0
Re: DCC tool Firmware update issue with R3 Lightning
Hi Birdaffirm,
You can follow the sequence to upload the new firmware in the FSSB-R3 User Guide in the chapter "Firmware update", but it is very easy:
1- Unplug USB wire of R3 (and TM Warthog sitck if you have it installed)
2- Launch DCC tool
3- Select the firmware to install
4- Plug the USB wire of R3 and the update will start automaticaly.
Best regards,
Shark
You can follow the sequence to upload the new firmware in the FSSB-R3 User Guide in the chapter "Firmware update", but it is very easy:
1- Unplug USB wire of R3 (and TM Warthog sitck if you have it installed)
2- Launch DCC tool
3- Select the firmware to install
4- Plug the USB wire of R3 and the update will start automaticaly.
Best regards,
Shark