DESKTOP FSSB R3 Warthog Pat.Pend.
Now you donīt have any excuse for not being the best
the Best of the best.



New Firmware & HID DEV TOOLs available






FSSB R3 Warthog Reviews
Dimebug Review French NEW
R.Seoane Review English
R.Seoane Review Spanish

If you take notice about any other review, Please let us know

The FSSB R3 is the new standard in high quality force sensor. Following the success of the venerable R1 and R2, R3 puts the new levels of quality, sensitivity and precision in hard to reach values even for expensive professional equipment. Definitely the best Joystick in the market

The new design of the sensor board, give a tact, smoothness and accuracy flight control, which makes the flying experience can not be compared to anything experienced before, high-precision maneuvers that are impossible without hundreds of training hours, are now made easily, thanks to the smoothness of control in areas close to the neutral position.

It is very difficult to express with words the feelings of control that the new R3 sensor transmits, but after testing it ... you can not fly without it.

It has provided the new design of a small deflection in the sensor system, which allows a slight angular movement in the stick, this, although very small, helps to facilitate adaptation to a force control, which is appreciated in the first flights.

Unlike R1 and R2 models, the new R3 has an propietary RealSimulator electronic system, both analog and digital processing, and can be used in two ways, both as an upgrade and as independently. Therefore behave as two separate joysticks, which can operate independently or together.


You only have to replace the HOTAS sensor module, for the FSSB R3 using information from the video
FSSB-R3-Warthog Alone and connect the FSSB-R3 to your computer via the mini USB found in the FSSB-R3, the FSSB-r3 will be recognized as an HID device.

You can use any Windows tools for game devices compatible with HID, and the Joystick will be displayed on all applications that can handle HID devices with the name "FSSB R3 Warthog".

During quality control process, which is done manually to each unit manufactured, the FSSB R3 is calibrated and adjusted, but has also included an electronic calibration that allows the user to perform this operation as many times as necessary.

Another new feature included in the FSSB-R3 is the inclusion of special options which will be modified according to the needs that users transmit to us, but in principle and initial delivery, these are the special options included in the original firmware.

HAT as POV or TRIM. The HAT switch can be modified at any time to behave like a POV (default) or trim command. This allows during the use of the joystick, the HAT control the views or submit your information to 4 HID buttons for use as TRIM, that is their function in real life.

FULL SCALE CONTROL to select between four possible full scale settings of the axes X and Y, this adjusts the ratio between force applied to the joystick and the signal sent to the computer. Although this looks like a sensitivity adjustment control is not exactly the same. This setting is ideal for adjusting joystick response in complex situations, such as a landing, refueling maneuver, ground attack. The setting values are FSC 1:1 3:4 1:4 1:2

NEUTRAL POSITION ADJUSTMENT. The adjustment of the neutral position manually allows exact adjustment of the neutral position of FSSB R3, in previous models R1 and R2, this adjustment was done through potentiometers on the electronic board, now is done using digital potentiometers, which are adjusted by the firmware when the user need, including in the middle of a flight mission.

During the selection of special modes, a beep will sound, indicating that the FSSB-R3 is in configuration mode when not hear any beep the FSSB-R3 is in normal operating mode.



Use as upgrade for the HOTAS.

In addition to the advantages offered by the use of the FSSB-R3 standalone, this has connectors that allow you to send data from FSSB-R3 to HOTAS electronic board, for installation using video FSSB-R3-Warthog HOTAS Upgrade.

When used with HOTAS electronics, you can connect both USB cables to the same computer, and choose with your computer, which joystick use. Obviously the user can configure the simulation program, using both, the HOTAS variables and buttons as well as native FSSB R3 varables and buttons, being limited only through the options of the software you are using.

As a rule, the HOTAS could benefit from both the high quality of data X and Y axes as well as some special modes FSSB R3.





Technical data

Independent force sensor for each axis.
Black anodized fixation element.
HOTAS electronic board fixation 2 M3.
Measurement electronic with separate channels.
Electronic neutral position adjust.
Full scale control with 4 levels, 1:1, 3:4, 1:2 & 1:4.
Sensibility control for Roll in 4 levels. 2.5, 4.5, 6.5 and 13 pounds
Sensibility control for Pitch in 4 levels 4, 6, 9 and 13 pounds
2nd and 3rd DX button set
2nd and 3rd DX button set On Off control
4 Memory Slots for quick custom configuration
Auto-Load Memory Slot #1 if available
Firmware upgrade.
One piece aluminum white anodized case.
Required screws included.
Watertight, airtight and dust proof yellow plastic hard case.
Electric connections made by connectors. No soldering required.
Mini USB connection wire included
Max. applied force 13 Lbs
Max. allowed force 20 Lbs

Stick_1.02.0_Pag1-SMM_300 Stick_1.02.0_Pag2-HAT_300 Stick_1.02.0_Pag3-DMS_300 Stick_1.02.0_Pag4-TMS_300 Stick_1.02.0_Pag5-CMS_300 Stick_1.02.0_Pag6-Trigger_300

Installation videos and documentation Firmware V1.00.0







R3 450€ + shipping cost
European Community Citizens must add the European taxes
This price is only available for home user customers.
For commercial use, price is higher and product is different, commercial customers must take contact with sales department for quotation

Contact for ordering information or use credit card below



  • FSSB R3: in Stock