Hello,
When I change the SLOT from 1st to 2nd, the function don’t have effect.
In the 1st I have a basic Flight profile (ROLL 4.65 for example) in the Slot 2 I have 2.45
When I play DCS I enable the MMS, change the profile via pinkie + CMS Right but the profile rimane the same (1st profile)
How can I figure out ?
Slot Memory
-
- Posts: 9
- Joined: Thu Dec 02, 2021 6:34 pm
- Product: R3L
- S/N: 622
Slot Memory
Last edited by Andrea_Papaleo on Mon Dec 13, 2021 7:40 pm, edited 1 time in total.
-
- Posts: 9
- Joined: Thu Dec 02, 2021 6:34 pm
- Product: R3L
- S/N: 622
Re: Slot Memoty
I have HOTAS WARTHOG and Firmware 4.0.1
-
- Posts: 137
- Joined: Thu Jan 10, 2013 1:44 pm
- Product: ---
- S/N: 0
Re: Slot Memory
Hi Andrea,
I just checked the change slot functionality with the 4.0.1 firmware and it works fine.
The change of slot is done with the SMM + CMS, not with SMM + (pinky+CMS), please check the page 123 of user guide. And the SMM is launched with the CMS center or with Paddle + Pinky (according to what you have configured in the RS_HID_DEV_TOOL).
If this answer doesn't fix your problem, send me a private message.
Best regards,
Shark
I just checked the change slot functionality with the 4.0.1 firmware and it works fine.
The change of slot is done with the SMM + CMS, not with SMM + (pinky+CMS), please check the page 123 of user guide. And the SMM is launched with the CMS center or with Paddle + Pinky (according to what you have configured in the RS_HID_DEV_TOOL).
If this answer doesn't fix your problem, send me a private message.
Best regards,
Shark
-
- Posts: 9
- Joined: Thu Dec 02, 2021 6:34 pm
- Product: R3L
- S/N: 622
Re: Slot Memory
Perfect ! Works now good.
Thanks
Thanks