Hey Guys,
Just received my R3L + SGRH on MJF FW 4.00.1 and for some reason none of my button presses send in the HID Device Tool or in windows at all but the axes do work properly. It also looks like the Dx section on the HID tool is entirely grayed out. Regardless of how many times I connect/reconnect, different firmwares/softwares combinations I try, Windows simply won't recognize any keypresses from the stick. It also looks like the HID tool doesn't recognize button presses either so I don't think this is a configuration or windows related issue, nor a hardware connector issuegiven that the axis is recognized successfully. Super frustrating.
Edit: I'm not sure if the grip is getting power at all actually given that the LED's never seem to turn on (but not sure if that was only a SGRH-CE feature)
This is what my HID Device Tool looks like, note that for some reason I can't really modify any Dx buttons or other options, nor can I change to different modes like Game Mode or Macros.
FSSB R3L = SGRH logical buttons do not send.
-
- Posts: 17
- Joined: Mon Jan 10, 2022 5:05 pm
- Product: R3L
- S/N: 656
-
- Posts: 137
- Joined: Thu Jan 10, 2013 1:44 pm
- Product: ---
- S/N: 0
Re: FSSB R3L = SGRH logical buttons do not send.
Hi Maxim,
Yes, looks like the grip doesn't receive power, please check that the grip connector pins are OK and that no one has been accidentally bent.
Best regards
Yes, looks like the grip doesn't receive power, please check that the grip connector pins are OK and that no one has been accidentally bent.
Best regards
-
- Posts: 17
- Joined: Mon Jan 10, 2022 5:05 pm
- Product: R3L
- S/N: 656