R3L Y axis not calibrating
-
- Posts: 1
- Joined: Fri Nov 16, 2018 7:48 am
- Product: R3L
- S/N: 86
R3L Y axis not calibrating
Hello, last flight was on Sunday, everything was working correctly. Today I booted up and Y axis behaves like this. It's like it pulls back on its own. I tried flashing new mjf firmware, doing npa, recalibrate - nothing helps. X axis is working perfectly fine, Y axis works as well, just can't be centered correctly. Any idea what this may be?
You do not have the required permissions to view the files attached to this post.
-
- Posts: 7
- Joined: Fri Feb 08, 2019 11:11 am
- Product: R3L
- S/N: 101
Re: R3L Y axis not calibrating
I have a similar issue with my Y-axis is all the way forward and my warning lights on the base are flashing red constantly. If I unplug and plug it back in the light flashes green three or four times then turns to constant flashing red.
-
- Posts: 702
- Joined: Thu Jan 10, 2013 6:03 pm
- Product: ---
- S/N: 0
Re: R3L Y axis not calibrating
HI if after installation of the last firmware 4.00.1 , the axis continue out of range, your sensor its broken, so please take contact general_inf@realsimulator.com for repair.
Thanks
Thanks