BFA Change with Angle Offset

Post Reply
{ATWG}steve
Posts: 1
Joined: Fri May 07, 2021 4:51 pm
Product: R3L
S/N: 508

BFA Change with Angle Offset

Post by {ATWG}steve »

As the title suggests, after some testing I found out the BFA setting is not changed with angle change. When I tried the -12 degree angle like the real jet with a MIN BFA, I can notice a "bump" on the original gray axis. It's not that big of an issue, but adding BFA change with offset can significantly reduce the unintended cross control.
Dragon
Posts: 683
Joined: Thu Jan 10, 2013 6:03 pm
Product: ---
S/N: 0

Re: BFA Change with Angle Offset

Post by Dragon »

Thanks and just as we are doing a big revision, to include the RS-35 linear throttle base, we would like fix this issue, we will test it, if we can not replicate here the issue, we eill take contact with you in order to find the way to fix it.

THANKS
Post Reply