Y-axis issue
Posted: Sun Mar 20, 2022 12:15 pm
Hi,
Yesterday FSSB R3L was still working perfect. Today, booted PC and R3L is flashing constantly. In HID_DEV_TOOL I can see Y-axis is oscillating between min and max values constantly. I found several topics in this forum, describing the same issue. But still I can't seem to fix it.
I tried to re-install firmware with DCC, but everytime the program ends up 'not responding'. So, I disconnect device, then select firmware file, and then connect device again (as instructions describe). But then, there is no progress and DCC is 'not responding'. Tried with MJF_FW_2_00_2.FSSB_R3 first, then with BMS_FW_2_00_2.FSSB_R3. Then downloaded from this topic: https://realsimulator.com/FSSB_R3_Forum ... .php?t=220. Tried again.
Same thing everytime. So it seems I can't re-install the firmware for some reason.
Any advice?
Thanks!
Best regards,
Jan
Yesterday FSSB R3L was still working perfect. Today, booted PC and R3L is flashing constantly. In HID_DEV_TOOL I can see Y-axis is oscillating between min and max values constantly. I found several topics in this forum, describing the same issue. But still I can't seem to fix it.
I tried to re-install firmware with DCC, but everytime the program ends up 'not responding'. So, I disconnect device, then select firmware file, and then connect device again (as instructions describe). But then, there is no progress and DCC is 'not responding'. Tried with MJF_FW_2_00_2.FSSB_R3 first, then with BMS_FW_2_00_2.FSSB_R3. Then downloaded from this topic: https://realsimulator.com/FSSB_R3_Forum ... .php?t=220. Tried again.
Same thing everytime. So it seems I can't re-install the firmware for some reason.
Any advice?
Thanks!
Best regards,
Jan