R3 FSSB X-axis uncentered

Post Reply
Heng_Zhu
Posts: 2
Joined: Mon Jul 05, 2021 5:24 pm
Product: R3L
S/N: 535

R3 FSSB X-axis uncentered

Post by Heng_Zhu »

Hello,

I had swapped to a stick and back to the R3 FSSB and found that the base is no longer centered. The x-axis has a ghost input of about 5% (which fluctuates a bit) to the right. I have tried re-centering in game controllers, which did not work. I have also tried to activate SMM using pinky+paddle and/or CMS center but that does not seem to work at all, there is no sound and no re calibration happens. Attached is a photo, is my base broken?
You do not have the required permissions to view the files attached to this post.
Dragon
Posts: 702
Joined: Thu Jan 10, 2013 6:03 pm
Product: ---
S/N: 0

Re: R3 FSSB X-axis uncentered

Post by Dragon »

Hi Heng.

Dont worry, only as do you have a Realsimulator GRIP, the NPA sequence is launched with Trigger1 + NWS center. take in mind, with our F16 and F18 grips the configuration slots are selected with the rotary switch in the under trim switch, so you dont have SMM

Please take a look to the page 80 in the R3 documentation ;-)

I hope you will cna adjust easily and please let us if all is OK
Thanks
Heng_Zhu
Posts: 2
Joined: Mon Jul 05, 2021 5:24 pm
Product: R3L
S/N: 535

Re: R3 FSSB X-axis uncentered

Post by Heng_Zhu »

AH yes! It is fixed now, thank you!
Post Reply