Hi there.
I've had the FSSB R3 for almost a year, and it works wonderfully!
I do however, have a small issue: it shows up 3 times in the Game Controllers settings (image below).
This was never an issue before as all the games I've used could recognise them all; however Star Citizen can (apparently) only recognise up to 4, of which the FSSB R3 is taking up 3!
Any tips on resolving this? I've tried updating to the latest firmware (MJF.FW.1.05.0) but that didn't help.
Thanks
FSSB R3 Warthog - Shows up as 3 devices.
-
- Posts: 3
- Joined: Mon Jan 27, 2014 12:26 pm
- Product: R3
- S/N: 36
FSSB R3 Warthog - Shows up as 3 devices.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 16
- Joined: Tue Oct 28, 2014 9:25 am
- Product: R3
- S/N: 75
- Location: SWEDEN
Re: FSSB R3 Warthog - Shows up as 3 devices.
Hi, I have the same problem.
The short-tirm fix is to open up Windows Device Manager - USB(or maybe HID?) and set the 2 imaginary warthogs to inaktive.
Just try your way forward to find the correct 2 devices and turn them off.
Merry Christmas
/Viggen
The short-tirm fix is to open up Windows Device Manager - USB(or maybe HID?) and set the 2 imaginary warthogs to inaktive.
Just try your way forward to find the correct 2 devices and turn them off.
Merry Christmas
/Viggen
-
- Posts: 702
- Joined: Thu Jan 10, 2013 6:03 pm
- Product: ---
- S/N: 0
Re: FSSB R3 Warthog - Shows up as 3 devices.
Hi interesting, that some now a days software only manage 4 HID devices.
Thanks for the update.
The BMS firmare only use one HID. so for this time you van use the BMS firmware.
The MJF firmware use three HIDs, as is already writed in the MJF thread. (I hope ) the first one is for the standar axes and buttone set, the second Hid is for the Pinky DX button set and the third for the Paddle button set (or viceversa )
If StartCitizen only reconize four Hids would be necesary reduce in the SpaceShip firmware the amount of button sets to Two or if necwsary to only 1 as you prefer.
Let me know
Dragon
Thanks for the update.
The BMS firmare only use one HID. so for this time you van use the BMS firmware.
The MJF firmware use three HIDs, as is already writed in the MJF thread. (I hope ) the first one is for the standar axes and buttone set, the second Hid is for the Pinky DX button set and the third for the Paddle button set (or viceversa )
If StartCitizen only reconize four Hids would be necesary reduce in the SpaceShip firmware the amount of button sets to Two or if necwsary to only 1 as you prefer.
Let me know
Dragon
-
- Posts: 3
- Joined: Mon Jan 27, 2014 12:26 pm
- Product: R3
- S/N: 36
Re: FSSB R3 Warthog - Shows up as 3 devices.
Viggen, thanks for the reply, didn't work for me unfortunately.
Dragon, thanks, I'll give that ago when I'm home after Xmas.
Dragon, thanks, I'll give that ago when I'm home after Xmas.
-
- Posts: 702
- Joined: Thu Jan 10, 2013 6:03 pm
- Product: ---
- S/N: 0
Re: FSSB R3 Warthog - Shows up as 3 devices.
Thats, Ok.
I need sitdown and work in some issues also, so I will do all at time.
Add the limit adjust for the sound advice in HID DEV TOOls
Add the SSF also and also get out one or two DX buttons set.
Humm Jordan, please, as this issue is related to the StartCitizen and we are doing the special firmware SSF just for this software, what about if the limitation in additional DX buttons will be applied to this firmware only? Just as BMS can work with all the necesary staff
Have a nice Saturday.
Dragon
I need sitdown and work in some issues also, so I will do all at time.
Add the limit adjust for the sound advice in HID DEV TOOls
Add the SSF also and also get out one or two DX buttons set.
Humm Jordan, please, as this issue is related to the StartCitizen and we are doing the special firmware SSF just for this software, what about if the limitation in additional DX buttons will be applied to this firmware only? Just as BMS can work with all the necesary staff
Have a nice Saturday.
Dragon
-
- Posts: 3
- Joined: Mon Jan 27, 2014 12:26 pm
- Product: R3
- S/N: 36
Re: FSSB R3 Warthog - Shows up as 3 devices.
Dragon,
I loaded the BMS firmware and that solved the problem, thanks!
I loaded the BMS firmware and that solved the problem, thanks!